步驟
5
5
重物
*桌子有一定重量，建議由最少2位成人移動.
*The desk is considerably heavy, and we suggest moving by at
least 2 adults.
Height Memory Se�ng
1. Set the desk to a preferred height by using the
“▼”“
”
buttons, 70cm for instance.
2.
Press the “M” SAVE button and the LED display shows “S-“,
then press “1” to save the 1st height position to 70cm. The LED
display shows “S-1”.
3.
Repeat step 1 and Step 2 with “2” and “3” to save the 2nd
and 3rd height.
4.
To recall saved settings, press “1”, “2” or “3”, and the desk
would automatically reposition to the saved height.
高度記憶設定
1.
使用
“▼”“
”
按鈕調節至理想高度，例如70CM 高
.
2.
按
“M”
儲存鍵直至
LED
控制面板顯示
“S-
”
,
然後再按
“
1
”
儲存現在
高度為第一個高度記憶
. LED
控制面板
“S-1”
代表設定完成
.
3.
重複以上動作至
“2”
跟
“3”
設定第二跟三高度記憶
.
4.
如要返回已儲存高度
,
按
“1”, “2” or “3”
一下
,
桌子便會自動回到
自定高度
.
防撞功能靈敏度設定
1.
同時按下
“▼”“
”
按鈕進入設定模式
.
2.
靈敏度設定有4個階段，分別爲：
“
A-0
”,“
A-1
”,“
A-2
”
和
“
A-3
”.
“
A-0
” -
防撞功能關閉
“
A-1
” -
防撞功能靈敏度為低
“
A-2
” -
防撞功能靈敏度為中
“
A-3
” -
防撞功能靈敏度為高
3.
同時按下
“▼”“
”
按鈕退出設定模式
.
An�-Collision Sensi�vity Se�ng
1. Press and hold the
“▼”“
” buttons for 5 seconds simult-
aneously to switch to sensitivity setting mode.
2. There are 4 sensitivity levels, and will be shown as follows:
“
A-0
”,“
A-1
”,“
A-2
” and “
A-3
”.
“
A-0
” - Anti collision function is OFF
“
A-1
” - Anti collision function at is at LOW sensitivity
“
A-2
” - Anti collision function at is at MIDIUM sensitivity
“
A-3
” - Anti collision function at is at HIGH sensitivity
3. Press and hold the
“▼”“
” buttons for 5 seconds to exit
sensitivity setting mode.