PLUGGING IN THE AMP40
How To Power-On Your AMP40
*IMPORTANT: If the AMP40 does not automatically power-on, confirm that
your AIRHOME5 multiroom audio system is connected to AC power. There
is no "on" switch on the AMP40 or the AIRHOME5. Refer to the ZENOVIA
AIRHOME5 User Guide for details and safety instructions.
Remove a cover cap and insert the AMP
40
into the AIRHOME
5
. The lower
LED status indicator on the AMP
40
will begin flashing red when power is
connected.
Remove
cover cap
Configure on
Wi-Fi network
(continued page 7...)
6
Insert
AMP
40
