-30-
If you encounter a problem with the mower, start by reviewing the possible causes in the table below. The
table below only covers problems that can be remedied by the user. For more serious problems, contact
your dealer or repair shop.
Problem
Cause
Solution
Engine doesn’t start.
No fuel.
Fuel the mower.
The gasoline in the mower was
purchased over a month ago.
Drain the gasoline in the fuel
carburetor and supply new gasoline.
Engine stop switch not set to RUN.
Set the engine stop switch to RUN.
Weak tugging on recoil starter.
Tug the recoil starter more firmly.
Closed fuel cock.
Open the fuel cock.
Drive clutch lever ON.
Set the drive clutch lever to OFF.
Blade clutch lever ON.
Set the blade clutch lever to OFF.
Engine doesn’t stop.
Engine stop switch not set to STOP.
Set the engine stop switch to STOP.
Mower doesn’t drive.
Gear shift lever in neutral.
Move the gear shift lever out of
neutral.
Drive clutch lever OFF.
Set the drive clutch lever to ON.
Mower doesn’t stop.
Drive clutch lever not completely OFF.
Move
the
drive
clutch
lever
completely to the OFF position.
Cutter shaft doesn’t run.
Blade clutch lever OFF.
Set the blade clutch lever to ON.
8. TROUBLESHOOTING
Summary of Contents for ZHM800
Page 2: ......