background image

GB-2

SRTZ2601F

EC DECLARATION OF COMFORMITY

We,

ZENOAH CO., LTD.

1-9, Minamidai, Kawagoe, Saitama, Japan

declare in sole responsibility that the following products referred to

in this declaration conform with

DIRECTIVE 89/336/EEC, 98/37/EC, 2000/14/EC, 97/68/EC,

2002/88/EC, 2002/44/EC, prEN774[2001]

The products referred are :

DESIGNATION : SHORT REACH TRIMMERS

MODELS : SRTZ2601F

SERIAL NUMBERS : 70300001 and up

The company named above will keep on file the following technical

documentation for any inspection furpose.

· Operation instructions as confirmed

· Plans and Drawings

· Description of measures designed to ensure conformity

· Other technical documentation

: Specification sheet

: Inspection standard

Saitama, Japan,

1st April 2007

Masahiko GOUDA

General Manager, Quality Assurance Department

EXPLANATION OF SYMBOLS AND SAFETY WARNINGS

APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION

DIRECTIVE 97/68/EC AMENDED 2002/88/EC

e13*97/68SH2G3*2002/88*0094*03

WARNING!!!

RISK OF DAMAGING HEARING

Wear head, eye and ear protection.

SRTZ2601F

25.4 cm

3

94 dB(A)

110 dB(A)

12.6 m/s

2

6.3 m/s

2

MODEL

SOUND LEVEL

VIBRATION LEVEL

L

pAav

L

wA

(guaranteed)

a

hv,eq

A(8)

prEN774[2001]

2000/14/EC

ISO 11094

2002/44/EC

prEN774[2001]

Summary of Contents for SRTZ2601F
















Reviews: