![background image](http://html1.mh-extra.com/html/zenoah/ht220-75/ht220-75_operators-manual_3449076002.webp)
2
1045 - 001 -
01.06.2020
Contents
Introduction .................................................................... 2
Troubleshooting .......................................................... 20
Safety ............................................................................ 5
Transportation, storage and disposal. ......................... 21
Operation ..................................................................... 11
Technical data ............................................................. 22
Maintenance ................................................................ 15
Warranty ..................................................................... 23
Introduction
To customers
Thank you for purchasing a Husqvarna Zenoah product.
This operator’s manual describes the correct handling of
the product, simple inspection, and maintenance.
Please read this manual carefully before and during
using this product to demonstrate superior performance
and to make sure that you can perform work
comfortably.
After reading, be sure to keep it in a safe place where
you can easily accessible for reference. Please note that
the product you purchased may not match the contents
of this manual due to improvement in the product
specifications, etc.
Service and warranty
Inquiries
For inquiries regarding this product, purchase of
consumables, and service orders, please contact your
local dealers. When inquiring, please provide the Model
name and Serial number (see the figure below).
Please feel free to contact a Zenoah dealer if you have
any notices or opinions regarding product technology
and others.
HT220-75
CHT220-60
Warranty
A warranty card is separately attached to this product.
Be sure to check the seal of the dealer name, date of
purchase, model name, and the serial number and
receive it from the dealer, read the contents carefully,
and keep it in a safe place.
Supply term of spare parts
The spare parts supply period for this product is eight
years after the discontinuation of production.
However, we may consult with you about delivery dates,
etc. regarding special parts, even within the supply
period.
The spare parts supply will terminate at the above-
mentioned supply period in principle. However, even
after the supply period has expired, if you request for
parts supply, we will discuss the delivery date and price.
WARNING: Modification of the machine is
dangerous. Do not modify this machine.
Please note that if the machine was
modified or used for a purpose different from
the intended use described in the operator’s
manual, the manufacturer's warranty will not
cover the failure of the machine.
Product description
We are continuously developing products. Therefore,
design and appearance may be changed without notice.
Note: This product is a hedge trimmer driven with a two-
cycle engine.
Purposes
This product is designed for pruning planted shrubs,
such as hedges, and tea trees.
Do not use it for any purposes other than the intended
use. Doing so may cause unexpected accidents.
Note: The use of this product may be subject to the
National regulations.
Model Name
Serial Number
Model Name
Serial Number