manualshive.com logo in svg

Zenoah EXZ2600DL, Owner'S Manual

Share
Download
Zenoah EXZ2600DL Owner'S Manual Download Page 5

GB-5

G

B

EXZ2600DL

2. Specification

Engine

Type ............................................................................ Air-cooled 2-stroke gasoline
Model ............................................................................................  Zenoah GZ25N
Displacement ...........................................................................................  25.4 cm

3

Max. output ..................................................  1.2 Hp (0.9 kW) at 7500/min-1 (rpm)
Idle speed .......................................................................... 3000 ±200/min-1 (rpm)
Fuel ............................................................................  Mixture (Gasoline 50 : Oil 1)

(when using  ZENOAH genuine oil)

Carburetor ........................................................................  Walbro Diaphragm type
Spark plug .......................................................................................... NGK CMR7A

Fuel tank capacity ............................................................................................... 0.65 L

BC-EX

Overall size (L 

 

W 

 

H) ........................................................  1790 

 

250 

 

310 mm

Dry weight w/o acc. ...........................................................................................  5.3 kg
Transmission .........................................................  Centrifugal clutch, rigid drive shaft
Reduction ratio ....................................................................................................  1.357
Cutting head rotating direction .............................  Counter-clockwise (Operator view)

LRT-EX

Overall size (L 

 

W 

 

H) .......................................................   2300 

 

250 

 

310 mm

Dry weight w/o acc. ...........................................................................................  6.1 kg
Transmission .........................................................  Centrifugal clutch, rigid drive shaft
Reduction ratio ........................................................................................................  4.0
Cutting head

Type ............................................................................ Reciprocating Double blade
Tooth ........................................................................................................... 28 teeth
Pitch ............................................................................................................  30 mm
Effective cut width ........................................................................................  40 cm
Angle adjust range ................. 90° (±45° from cutting head position aligned shaft)

PS-EX

Overall size (L 

 

W 

 

H) ........................................................  2100 

 

250 

 

310 mm

Dry weight w/o bar and chain .........................................................................   5.05 kg
Transmission .........................................................  Centrifugal clutch, rigid drive shaft
Reduction ratio ......................................................................................................  0.94
Cutting head

Guide bar:

Type .................................  OREGON DOUBLE GUARD 109666
Size ...............................................................................  300 mm

Saw chain:

Type ...........................................................  OREGON 90SG44X
pitch 

 

gauge ..................................................  9.53 

 

1.07 mm

Sprocket .............................................................................................................  7T
Oil pump .............................................................................................  Plunger type

HE-EX

Overall size (L 

 

W 

 

H) ........................................................  1810 

 

450 

 

377 mm

Dry weight w/o acc. ...........................................................................................  7.2 kg
Transmission ........  Centrifugal clutch, rigid drive shaft, Bevel gears (Angle: 90 deg.)
Reduction ratio ........................................................................................  2.538 (33.13)
Blade length ....................................................................................................  200 mm

Specifications are subject to change without notice.

Summary of Contents for EXZ2600DL

































Reviews:

No comments

Brands by name

Popular brands

Load more brands