background image

GB-2

EBZ3000RH

EXPLANATION OF SYMBOLS AND SAFETY WARNINGS

SOUND LEVEL

VIBRATION LEVEL

ON HANDLE

ISO 11094

LwA

measured

guaranteed

ISO 22867

A(8)

MODEL

a

hv,eq

EBZ3000RH

29.5 cm

3

99.6 dB(A)

100 dB(A)

2.4 m/s

2

1.45 m/s

2

APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION (2002/88/EC)

e13*97/68SH2G3*2002/88*0098*02

EC DECLARATION OF COMFORMITY

We,                             

 Husqvarna Zenoah Co., Ltd.

1-9, Minamidai, Kawagoe, Saitama, Japan

declare in sole responsibility that the following products referred to in this
declaration conform with

 DIRECTIVE 89/336/EEC, 98/37/EC

2000/14/EC Internal control production.

The products referred to are:

DESIGNATION

: BLOWER

MODELS

: EBZ3000RH

SERIAL NUMBERS

: 70400001 and up

Thecompany named above will keep on file the following technical docu-
mentation for any inspection purpose.

• Operation instructions
• Plans and Drawings
• Description of measures designed to ensure conformity
• Other technical documentation        :Specification sheet

Inspection standard

Saitama, Japan                      

1st December 2008

Isamu NAKAZATO
General Manager, Quality Assurance Department

WARNING!!!

RISK OF DAMAGING HEARING

Wear head, eye and ear protection.

Summary of Contents for EBZ3000RH















Reviews: