Zenoah EBZ3000RH, Manual

Page: 26 / 60

26
7. Fuel
English
■
HOW TO MIX FUEL
Pay attention to agitation.
1. Measure out the quantities of gasoline and oil to be
mixed.
2. Put some of the gasoline into a clean, approved fuel
container.
3. Pour in all of the oil and agitate well.
4. Pour In the rest of gasoline and agitate again for at
least one minute. As some oils may be difficult to
agitate depending on oil ingredients, sufficient
agitation is necessary for the engine to last long. Be
careful that, if the agitation is insufficient, there is an
increased danger of early piston seizing due to
abnormally lean mixture.
5. Indicate the contents on outside of container for
easy identification. To avoid mixing up with raw
gasoline or other containers.
■
FUELING THE UNIT
1. Untwist and remove the fuel cap.
2. Put fuel into the fuel tank to 80% of the full capacity.
3. Fasten the fuel cap securely and wipe up any fuel
spillage around the unit.
1. Select bare ground for fueling.
2. Move at least 10feet (3meters) away from the
fueling point before starting the engine.
3. Stop the engine and let it cool for few minutes
before refueling the unit. At that time, be sure to
sufficiently agitate the mixed gasoline in the
container.
4. Do not smoke or place hot object near fuel.
WARNING
IMPORTANT