■
PUTTING ON WAIST PAD
(BC4401DW only)
• Warp the waist pad around the shaft tube
and the throttle wire.
■
INSTALLING CUTTING HEAD
1. While locking the gear shaft by inserting
the attached bar into the upper holder and
the gear box, loosen and remove the
hexagon bolt(left-handed)
2. Fit the spacer attached to the head
assembly between the upper and lower
holders. Then screw in the cutting head to
the gear shaft over the holders. Hand-
tighten it securely.
12
Set Up
Summary of Contents for BC4401DW
Page 26: ...Parts List 26 Fig 1 DRIVE UNIT BC3401DL S N 60200000 and up...
Page 28: ...Fig 2 ENGINE UNIT BC3401DL S N 60200000 and up 28 Parts List...
Page 30: ...Parts List 30 Fig 3 DRIVE UNIT BC4401DW S N 60200000 and up...
Page 32: ...Fig 4 ENGINE UNIT BC4401DW S N 60200000 and up 32 Parts List...