Zenoah BC3401DL, Owner'S/Operator'S Manual, Page: 11 / 36

■
MOUNTING ENGINE
• Put the engine onto the clutch side end of
the driveshaft assembly, making the fuel
tank and the cutter head come to the same
side. Attach the engine firmly with the 4
screw provided.
■
INSTALLING HANDLE
• Mount the handle to the shaft tube and
clamp it at your best operating position.
■
INSTALLING DEBRIS GUARD
• Put the debris guard on the shaft tube near
the gear box, attach it with the 2 screws
and hardware provided.
■
CONNECTING THROTTLE WIRE
1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to the
joint on the top of the carburetor.
• When installing the cleaner cover, make
sure to put the high-tension wire in it.
■
CONNECTING SWITCH WIRES
• Connect the switch wires between the
engine and the main unit. Pair the wires of
the same color.
NOTE
Set Up

11
