Zennio ZVP-CB2M Assembly Instructions Download Page 1

Page: 1 / 2

GetFace IP

Surface installation - Frame - 2 modules
ZVP-CB2M

Assembly instructions

Ed. 1

For more info

Page

ASSEMBLY OF THE FRAME (ONE-COLUMN LAYOUT)

Please remove the blind panel of the basic unit and place

the metallic auxiliary parts supplied with the frame.

Place the basic unit correctly levelled on the wall and drill

two holes for the expanding plugs. Recover the cables and fix
the module with the screws (included).

Connect the cables to the basic unit and interconnect the

additional modules with the bus.

Fix the blind panel (or additional modules that remain in

sight) with the supplied screws and put the labels with captions
next to the buttons.

Place the frame.

Fix the frame by using the supplied Allen key.

Note:

it is recommended to install the backplate (ZVP-BPLA2) if the wall surface irregularity is greater than 0.5mm.

Summary of Contents for ZVP-CB2M

Page 1: ...evelled on the wall and drill two holes for the expanding plugs Recover the cables and fix the module with the screws included 3 Connect the cables to the basic unit and interconnect the additional mo...

Page 2: ...er the cables and fix the module with the screws included 3 Place the right assembly on the wall by using the T shape parts Mark the position of the holes drill them and afterwards place an expansive...