ZoningBOX 6 / ZoningBOX 4
Technical Support:
4
1
INTRODUCTION
1.1
ZoningBOX 6 / ZoningBOX 4
ZoningBOX 6 and ZoningBOX 4 from Zennio are two versatile KNX actuators intended
for the climate management of rooms (or zones) where the air flow inputs are regulated
through motorised gates or grilles.
The most outstanding features of the device are:
6 or 4 output channels
for the connection of the motorised grilles (at 12V or
24V) of up to six or four zones.
Manual control
over the different grilles through the on-board push buttons.
LED indication
of the output channels status and for error notification
.
Zoning module
, responsible for managing the logic between the external
thermostats, the HVAC machine and the grille control module.
Heartbeat
or periodical “still-alive” notification.
The control orders addressed to the HVAC machine will be sent to the KNX bus as
communication objects, so they can be managed by specific interfaces, depending on
the HVAC machine type.
…
Thermostat
ZoningBOX
Grille 1
Grille n
KNX
KNX
Zoning
module
Grille
control
Interface
HVAC unit
Figure 1.
ZoningBOX Architecture
