Motion Detector
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
17
Figure 14:
Channel – lock function.
Enable / Lock
: sets how to activate or deactivate the channel lock.
Always Unlocked: the channel will always remain active.
Lock using 1-bit Object: the channel will switch from active to inactive (or
vice versa) according to the value received through the “
[Ix][Ci] Channel
Lock
” object.
Figure 15
. Lock using 1-bit object
Selecting this option also requires setting the following parameters:
o
Configuration
: sets the value (0 / 1) that will switch the channel to
unlocked and the value that will switch it to locked. The options are
“0 = Unlock; 1 = Lock” and “0 = Lock; 1 = Unlock”.
o
Time to Unlock
: sets a delay between the reception of the value
and the actual re-activation (unlock) of the channel. The available
range is 0 to 255 seconds.
o
Initial Status (after reset)
: sets the lock or unlock state of the
channel at the device start-up or after a bus power failure: “Last
state”, “Unlocked”, “Locked”. On the very first start-up, the last state
is assumed as unlocked.
