© Zennio Avance y Tecnología S.L.
Edition 1
Page.
1
/
2
DALIBOX Interface 64/32
Interface for one DALI bus with up to 64 devices and 32 lighting groups
ZDI-DLI
Technical Documentation
FEATURES
Possibility of controlling up to 64 DALI ballasts and up to 32 lighting groups.
Scene sending and saving.
Error detection and monitoring.
Burn-in, Stand-by and Auto-off functions.
Manual control through buttons and status indication through display.
1.54” display (128 x 64 pixels) used for setting and notifications.
External power supply of 110/230V 50/60Hz.
Total data saving on KNX bus failure.
Integrated KNX BCU.
Size 67 x 90 x 79mm (4.5 DIN units).
DIN rail assembly (EN 50022), through pressure.
DALI Standard compatible
Conformity with th
e
CE directives.
Programming button
: short button press to set programming mode. If this button is held while plugging the device to the KNX bus, it enters into safe
mode.
Programming LED:
programming mode indicator (red). When the device enters into safe mode, it blinks (red) every half second. The manual mode is
indicated by the green color. During the start-up (reset or after KNX bus failure) and if the device is not in safe mode, it emits a red flash.
1
. DALI bus output
2
. Display
3
. Control buttons
4
. Power supply indicator LED
5
. External power supply
6
. Programming indicator LED
7
. Programming button
8
. KNX connector
Figure 1.
DALIBOX Interface 64/32
3
2
7
5
4
6
1
8
GENERAL SPECIFICATIONS
CONCEPT
DESCRIPTION
Type of device
Electric operation control device
KNX
supply
Voltage (typical)
29VDC SELV
Voltage range
21…31VDC
Maximum
consumption
Voltage
mA
mW
29VDC (typical)
12.5
362.5
24VDC
(1)
15
360
Type of connection
Typical bus connector TP1, 0.80mm ø
Ext. power
supply
Voltage and frequency
110/230VAC 50/60Hz
Maximum consumption
100mA
Operation temperature
from 0ºC to +45ºC
Storage temperature
from -20ºC to +55ºC
Operation humidity
5 to 90% RH (no condensation)
Storage humidity
5 to 90% RH (no condensation)
Complementary characteristics
Class B
Protection class
II
Operation type
Continuous operation
Device action type
Type 1
Electrical stress period
Long
Degree of protection
IP20, clean environment
Installation
Independent device to be mounted inside electrical panels with DIN rail (EN
50022).
Minimum clearances
Not required
Response on KNX bus failure
Data saving according to parameterization
Response on KNX bus restart
Data recovery according to parameterization
Operation indication
The programming LED indicates programming mode (red). The power supply LED
indicates external power (green). Display allows both configuring the DALI system
and supervising the current status.
Weight
180g
PCB CTI index
175V
Housing material
PC FR V0 halogen free
(1)
Maximum consumption in the worst case scenario (KNX Fan-In model)