Zennio MAXinBOX SHUTTER 4CH, User Manual

Page: 6 / 21

MAXinBOX SHUTTER 4CH / 8CH v2
http://www.zennio.com Technical Support: http://support.zennio.com
6
2 CONFIGURATION
2.1 GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
ETS PARAMETERISATION
The only parameterisable screen available by default is General. From this screen it is
possible to activate/deactivate all the required functionality.
Figure 2. General screen
Outputs [ disabled /enabled ]
1
:
enables o disables the “Outputs” tab on the left
menu. See section 2.2 for more details.
Logic Functions [ disabled /enabled ]:
enables o disables the “Logic
Functions
” tab on the left menu. See section 2.3 for more details.
Scene Temporization [ disabled /enabled ]:
enables o disables the “Scene
Temporization
” tab on the left menu. See section 2.4 for more details.
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[ default /rest of options].