KNX USB SC
Technical Support:
5
Note
:
in case the interface is not properly connected to a PC through the
USB port, this LED will remain off even if the bus connection has been
established.
Data transfers will make the LEDs
blink
. Therefore, for example, the USB LED will
blink during the assignment of an individual address to Zennio KNX USB Interface,
while it will be both LEDs that blink during an ETS download to another device
connected to the bus.
For detailed information about the technical features of the device, as well as on
security and installation procedures, please refer to the device
Datasheet
, included
within the device packaging and also available at