KLIC-DA LT
Technical Support:
http://zennioenglish.zendesk.com
17
3.1.1.6
ADDITIONAL INFORMATION (STATUS)
No additional parameter configuration is required for this function.
If enabled, the following communication objects will be available:
[Addit. Info.] Electrical Energy Consumption
: four-byte object that reflects
the total energy consumption (in kWh) till now, as reported by the Altherma
LT system.
[Addit. Info.] Energy Production
: four-byte object that reflects the total
energy production (in kWh) till now, as reported by the Altherma LT system.
[Addit. Info.] Flow Rate
: two-byte object that reflects the current water flow
rate (in litres per hour, according to the KNX standard; note that the actual
user interface of the Altherma LT system may use other units), as reported by
the Altherma LT system.
Whenever the Altherma LT system notifies a change in the status of the above
indicators, KLIC-DA LT will automatically send the corresponding object to the KNX
bus.
