Zennio ALLinBOX 88, Technical Documentation

Page: 2 / 4

© Zennio Avance y Tecnología S.L. Edition 1 Further information www.zennio.com Page 2/4
GENERAL SPECIFICATIONS
CONCEPT DESCRIPTION
Type of device Electric operation control device
External
power supply
Voltage 110-240VAC 50/60Hz
Maximum consumption 250mA@110VAC / 125mA@230VAC
KNX supply
Voltage (typical) 29VDC SELV (with KNX coil)
Maximum rated current (I
BUS
) 320mA
Connection type Typical TP1 bus connector for 0.80mm Ø rigid cable
Additional
output Voltage (typical) 29VDC SELV
Maximum rated current (I
AD
) I
AD
+ I
BUS
≤ 320mA
Operation temperature -5°C .. +45°C
Storage temperature -20°C .. +55°C
Operation humidity 5 .. 95%
Storage humidity 5 .. 95%
Complementary characteristics Class B
Protection class / Overvoltage category II / III (4000V)
Operation type Continuous operation
Device action type Type 1
Electrical stress period Long
Degree of protection / Pollution degree IP20 / 2 (clean environment)
Installation
Independent device to be mounted inside electrical panels with DIN rail (EN
50022)
Minimum clearances Not required
Power failure back-up time 110ms
Maximum current before overload notification 500mA
Response on KNX bus failure Data saving according to parameterization
Response on KNX bus restart Data recovery according to parameterization
Operation indicator See page 1
Weight 521g
PCB CTI index 175V
Housing material / Ball pressure test temperature PC FR V0 halogen free / 75ºC (housing) - 125ºC (connectors)
MAIN POWER SUPPLY SPECIFICATIONS AND CONNECTIONS
CONCEPT DESCRIPTION
Power supply protection
fuse
Voltage 110-240VAC 50/60Hz
Current 6.3A
Response type F (Fast acting)
Connection method Screw terminal block
Cable cross-section 1.5-4mm² (IEC) / 26-10AWG (UL)
AUXILIARY POWER OUTPUT SPECIFICATIONS AND CONNECTIONS
CONCEPT DESCRIPTION
Connection method Screw terminal block
Cable cross-section 1.5-4mm² (IEC) / 26-10AWG (UL)
OUTPUTS SPECIFICATIONS AND CONNECTIONS
CONCEPT DESCRIPTION
Number of outputs 8
Output type / Disconnection type
Potential-free outputs through bistable relays with tungsten pre-contact /
Micro-disconnection
Rated current per output
AC 16(6)A @ 250VAC (4000VA)
DC 7A @ 30VDC (210W)
Maximum load per output
Resistive 4000W
Inductive 1500VA
Maximum inrush current
800A/200μs
165A/20ms
Different phases connection
Possibility of connecting different phases. It is not allowed to connect power
supplies of different order, SELV with NO SELV, in the same block
Maximum current per block 40A
Maximum current per channel 16A
Short-circuit protection NO
Overload protection NO
Over-voltage protection NO
Connection method Screw terminal block
Cable cross-section 0.5-2.5mm² (IEC) / 26-12AWG (UL)
Outputs per common 2
Maximum response time 10ms
Mechanical lifetime (min. cycles) 3 000 000
Electrical lifetime (min. cycles)
1
100000 @ 8A / 25000 @ 16A (VAC)
¹ Lifetime values could change depending on the load type.