CHARGING
1. Connect the DC end of the supplied 24V adapter to the battery’s
charging port and plug AC side of the cable into a wall outlet.
2. The LED light on the battery will start to pulsate to indicate active
charging.
3. The battery is fully charged when the pulsating stops and the LED lights
remain fully illuminated.
4. Unplug the charger from the battery after charging or prior to use.
PLEASE NOTE
• Fully charge the battery for up to 6 hours before first use.
• The battery may be recharged at any time and at any battery level.
• It is not recommended to fully deplete the battery to the red LED level.
• The average run-time is approximate 2 hours, depending on speed level
and pressure applied during use.
INSTRUCTIONS FOR USE
PLEASE READ PRIOR TO USE
1. Power the massage gun on by moving the Power Switch, located at the
bottom of the battery, to the ON position.
2. With the Power Switch in the ON position, press the Power Button once
to turn the device on to Level One, press twice to turn device to Level
Two and three times for Level Three. The blue LED lights will indicate the
corresponding vibration level.
3. Pressing the Power Button again will turn the device off.
4. Power the device off by moving the power switch to the OFF position.
SPECIFICATIONS
• 3 vibration levels
• Vibration frequency: Level 1 – 30Hz. Level 2 – 40Hz. Level 3 – 53Hz
• 4 interchangeable nozzles included: Fork, Bullet, Flat and Round
• Powerful brushless high-torque motor with quiet glide technology
• Rechargeable 2400mAh Lithium-Ion battery (approx. 2 hours of use per
charge)
• Charge with included AC wall charger, 110-240V 50/60Hz, output
DC24V, 1A
• Measurements: 25 x 17.5 x 6.5 cm
• Weight: 1.1 kg
• Material: plastics with rubber handle
PRODUCT OVERVIEW
1. ON/OFF power switch
2. Power button
3. Power & Vibration Level indicator LED
4. Battery indicator LED
5. Interchangeable nozzle (x 4) with spare rubber connectors
INCLUDED NOZZLES
EN
FORK
BULLET
FLAT
ROUND