Zenith ZWM7121W User Manual Download Page 15

15 / EN

Washing Machine / User Manual

4.5.2 Preparing laundry for washing

•  Laundry items with metal attachments such as, underwiring , belt buckles or metal 

buttons will damage the product or break the glass door. Remove the metal pieces or 

wash the clothes by putting them in a laundry bag or pillow case.

•  Take out all substances in the pockets such as coins, pens and paper clips, and turn 

pockets inside out and brush. Such objects may damage the product or cause noise 

problem.

•  Put small size clothes such as infant's socks and nylon stockings in a laundry bag or 

pillow case.

•  Place curtains in without compressing them. Remove curtain attachment items.

•  Fasten zippers, sew loose buttons and mend rips and tears.

•  Wash “Machine washable” or “Hand washable” labelled products only with an 

appropriate programme.

•  Do not wash colours and whites together. New, dark coloured cottons release a lot of 

dye. Wash them separately.

•  Tough stains must be treated properly before washing.

•  Only use the dyes / colour changers and descaling agents which are appropriate to 

machine wash. Always follow the instructions on the package.

•  Wash trousers and delicate laundry turned inside out.

•  Keep laundry items made of Angora wool in a plastic bag in the freezer for a few hours 

before washing. This can reduce piling.

•  Laundry that is subjected to materials such as flour, lime dust, milk powder, etc. must be 

shaken off before placing into the product. Such dusts and powders on the laundry may 

build up on the inner parts of the product in time and can cause damage.

4.5.3 Tips for energy and water saving

Following information will help you use the product in an ecological and energy/water-

efficient manner.

•  Operate the product in the highest load capacity allowed for the programme you have 

selected, but do not overload. See, „Programme and consumption table“.

•  Observe the temperature instructions on the detergent packaging.

•  Wash slightly soiled laundry at low temperatures.

•  Use faster programmes for small quantities of lightly soiled laundry.

•  Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

•  If you plan to dry your laundry in a dryer, select the highest spin speed recommended 

during washing process. 

•  Do not use more detergent than the recommended on the detergent packaging.

4.5.4 Loading the laundry

1. Open the loading door.

2. Put the laundry items into the product, do not pack tightly.

3. Push and close the loading door until you hear the locking sound. Ensure that no items 

are caught in the door. The loading door is locked while a programme is running. The 

door can only be opened a while after the programme comes to an end. Then you can 

open the loading door.

Summary of Contents for ZWM7121W





































Reviews: