Zenith ZRY-316, Installation And Operating Manual

Page: 27 / 56

27
Playback
Counter Memory Function
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to [0:00:00] by pressing CLEAR.
4. Continue to play or record.
5. Press STOP ( x ) when recording or playback fin-
ishes.
6. Press RETURN (
O
) . The tape automatically
stops when the tape counter returns to about
[0:00:00].
S-VHS Quasi Playback (SQPB)
• This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
• SQPB is an abbreviation for S-VHS Quasi
Playback.
Playing a DVD
Playing a DVD
Playback Setup
1. Press OPEN/CLOSE ( Z ) to open the disc tray.
Load your chosen disc in the tray, with the play-
back side down.
2. Press OPEN/CLOSE ( Z ) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (
N ).
In some cases, the disc menu might appear
instead.
Use the
b B v V
buttons to select the title/chap-
ter you want to view, then press ENTER to start.
Press TITLE or DISC MENU/LIST to return to the
menu screen.
3. To stop the playback, press STOP ( x ).
The unit records the stopped point, depending on
the disc. “
Xx ” appears on the screen briefly.
Press PLAY ( N ) to resume playback (from the
scene point). If you press STOP ( x ) again or
unload the disc (“ x ” appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (
Z ) to remove the disc.
Press OPEN/CLOSE ( Z ) to close disc tray or
press POWER (
1
), the disc tray closes automati-
cally and unit turns off.
Notes:
• If parental control is set and the disc is not within the
rating settings you must input the password.
(See
[
Rating
]
on page 22).
• DVDs may have a region code. Your Recorder will not
play discs that have a region code different from your
Recorder. The region code for this player is 1 (one).
• Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move
to another title:
Press DISPLAY then use
v / V to select the title icon.
Then, press the appropriate numbered
button (0-9) or
b / B to select a title number.
Moving to another CHAPTER
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
• Press SKIP ( > or . ) briefly during playback
to select the next chapter or to return to the
beginning of the current chapter.
• Press SKIP ( . ) twice in quick successions to
step back to the previous chapter.
• To go directly to any chapter during playback,
press DISPLAY and use
v / V to select
the chapter icon. Input the chapter number or
use
b / B .
Slow Motion
1. Press BACKWARD ( m ) or FORWARD ( M )
during pause mode.
2. Use the BACKWARD ( m ) or FORWARD ( M )
to select the required speed:
4 steps (forward and backward)
3. To exit Slow Motion mode, press PLAY ( N ).
Search
1. Press BACKWARD ( m ) or FORWARD ( M )
during playback.
2. Press BACKWARD ( m ) or FORWARD ( M ) to
select the required speed:
4 steps (forward and backward)
3. To exit SEARCH mode, press PLAY ( N ).
DVD +R -R +RW -RW
Video
-RW
VR
DVD +R -R +RW -RW
Video
-RW
VR
DVD +R -R +RW -RW
Video
-RW
VR
DVD +R -R +RW -RW
Video
-RW
VR
DVD