AILERON TIP
V-20
Trim the Aileron tip with the Skin Clecoed to the wing. The Aileron Tip Rib is installed at the
same angle as the Rear Wing Tip Rib 6SV3-2
30.
Aileron Tip Ribs 6SV3-3
REFERENCE
: V-21, 6SV3
31.
Aileron Horn 6V10-2
REVERENCE
: V-19, 6V10, 6V14
TEMPLATE
: Cut a plywood template (use thin plywood) to fit against and bottom of the
front of the Aileron Skin. Drill a small pilot hole in the template for the horn bolt. Scribe a
10mm circle around the pilot hole.
POSITION
: The Horn is positioned on the Aileron Rib 6V10-31 with reference to the horn bolt
for the Rod end. Position the template on the aileron skin flush with the root rib, slide the
Horn to fit: flush with the top skin and to completely cover the 10mm scribe circle on the
template. Back drill the pilot hole in the template into the Horn.
HORN BOLT
: 5/16” hole,
RADIUS
: Radius the end of the Horn around the Horn bolt (minimum radius of 10mm)
RIVET
: Bolt the Horn to the template, Drill for 9 A5.
