Zenith ZLD15A1B, Service Manual

Page: 9 / 34

CM154 - 923-03495
9
ZLD15A1B - MENUS
USER MENUS
USER MENUS
Press the menu button repeatedly to display the available
menus shown below. Use the channel up/down buttons
to select a menu option.
CHANNEL
AUTO PROGRAM
For Auto program to work, the programming source
must be connected to the TV and the TV must be
receiving programming signals either over-the-air or
from a cable-type service provider.
CH.
Channel
Auto program
Manual program
Fine
Move Next
Use the menu button to select the Channel menu. Press
the volume up and then use the channel up/down
buttons to select the Auto program option. Press the
volume down button to begin the channel search. Wait
for auto program to complete the channel search cycle
before choosing a channel. The TV scans for over-the-
air channels and then channels provided by a cable
service.
Stop
Auto program TV 63
34%
Auto program
Channel being
memorized is
displayed
When the channel search is complete, use the channel
up/down buttons to review the memorized channels.
If you press the enter button in auto programming,
the search will stop and only channels programed up
to that point will be saved. Auto programming can
only memorize the channels which are being received
at that time.
ADD/DELETE CHANNELS
You can select Memory (to add the channel) or Erase
(to delete the channel from memory). In the channel
menu, press the volume up and use the channel up/
down buttons to select the Manual program option.
CH.
Channel
Auto program
Manual program
Fine
Memory
TV 7
Move Adjust Back
Current channel
is displayed
The current channel number is displayed. Press the
volume down button and then press the volume up/
down buttons to select a channel you want to add to
memory or erase. Each time you press the volume up/
down buttons, you toggle between Memory and Erase.
After pressing enter, the current channel is added to
Memory or Erased from the channel list.
TIMER
CLOCK
In the Timer menu, press the volume up and then use
the channel up/down buttons to select the Clock
option. Press the volume up and then use the channel
up/down buttons to set the current hour.
CH.
Timer
Clock
Off-timer
On-timer
-- : --
AM 10
Move
Adjust
Back
Press volume up and use the channel up/down buttons
to set the current minute. The clock starts when you
press the enter button.
OFF TIMER
Timer function operates only if current time has been
already set. Off-timer function overrides the on-timer
function if they are set to the same time.
CH. CH.
Timer
Clock
G
Off-timer
G
On-timer
G
11
: --
AM Run
30
Move
Adjust
Back