EN
18
4
Before operating
Final Check
Before you start using the fridge/
freezer check that:
1.
The feet have been adjusted for
perfect levelling.
2.
The interior is dry and air can
circulate freely at the rear of the
cabinet.
3.
Clean the interior as recommended
under “
Maintenance and cleaning
.”
4.
Insert the plug into the wall socket
and switch on the electricity supply.
• When the door is open
,
the fridge
interior light will come on.
5.
You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6.
Set the thermostat knob half way
between 1 and 5.
7.
Front edges of the cabinet may feel
warm. This is normal. These areas are
designed to be warm to avoid
condensation.
8.
Do not load the appliance
immediately it is switched on. Wait until
the correct storage temperature has
been reached. We recommend that
you check the temperature
with an accurate thermometer (see
Temperature
c
ontrol and
a
djustment).
Summary of Contents for ZICSD473
