Zenith ZB410, Owner'S Manual

Page: 7 / 21

13 12
This product has been manufactured under rigid quality
specifications and control and is warranted by AmerTac to,
under normal use and conditions, by you, the original
purchaser, be free of defects in material and workmanship for
the lifetime that you own it.
Should this device be proven defective, please return it,
prepaid along with proof of purchase (e. g. dated bill of sale,
UPC bar code from original package) to, AmerTac, Attn:
Returns Department, 250 Boulder Drive, Breinigsville, PA
18031
AmerTac’s obligations are limited to replacement or refund of
purchase price of this product and do not include any
liability for damages for claims because of accident, negli-
gence, misuse, alteration, commercial use, improper installa-
tion, or the simultaneous use of different battery types (e.g.
standard, alkaline or rechargeable).
This warranty does not cover product purchased, serviced or
otherwise used outside the United States or Canada. This
warranty is not transferable.
This warranty is in lieu of all other express warranties or
liabilities. Any implied warranties, including any implied
warranty of merchantability or fitness for any particular use,
shall be limited to duration of the warranty. In no case shall
AmerTac be liable for any consequential or incidental
damages whatsoever. No person or representative is
authorized to assume on behalf of AmerTac any liability
other than expressed herein in connection with the sale of this
product.
Some states/provinces do not allow limitations on the term of
an implied warranty or the exclusion or limitation of
incidental or consequential damage and the above limitations
or exclusions may not apply to you. This warranty gives you
specific legal rights. You may also have other rights which
vary from state/province to state/province.
Limited Lifetime Warranty Troubleshooting
Remote does not operate your product.
• Press the mode button of the product you want
to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
• Remote may not be compatible with your
product.
Remote does not operate some features of
your product.
• Program remote with a new code.
• Remote may not be able to operate all features
of your product or button names might be
different than your product.
Red Indicator blinks after you program a
product code.
• Remote did not accept the code.
• Try to program the code again or try a different
code.
For help with setup, please call: 201-661-9944.