APPENDIX
84
APPENDIX
0
01
1.. PPoow
weerr ((C
Coom
mm
maanndd:: kk aa))
To control Power On/Off of the TV.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0: Power Off
Data 1: Power On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
0
02
2.. IInnppuutt SSeelleecctt ((C
Coom
mm
maanndd:: kk bb)) ((M
Maaiinn PPiiccttuurree IInnppuutt))
To select input source for the TV.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV
Data 1: Analog
Data 2: AV1
Data 3: AV2
Data 4: Component 1
Data 5: Component 2
Data 7: RGB-PC
Data 8: HDMI1
Data 9: HDMI2
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* You can select HDMI3 using (cco
om
mm
maannd
d xx b
b).
* If you select input source, we recommend (cco
om
mm
maannd
d xx b
b).
0
03
3.. IInnppuutt SSeelleecctt ((C
Coom
mm
maanndd:: xx bb))
To select input source for TV.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna)
Data 01: DTV (Cable)
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Data 20: AV1
Data 21: AV2
Data 40: Component 1
Data 41: Component 2
Data 60: RGB-PC
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
0
04
4.. AAssppeecctt RRaattiioo ((C
Coom
mm
maanndd:: kk cc))
To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Picture menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1: 4:3
5: Zoom 2
2: 16:9
6: Set by program
4: Zoom 1
9: Just scan
Reserved
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
0
05
5.. SSccrreeeenn M
Muuttee ((C
Coom
mm
maanndd:: kk dd))
To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0: Screen mute off (Picture on)
Data 1: Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
0
06
6.. VVoolluum
mee M
Muuttee ((C
Coom
mm
maanndd:: kk ee))
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
0
07
7.. VVoolluum
mee C
Coonnttrrooll ((C
Coom
mm
maanndd:: kk ff))
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
0
08
8.. C
Coonnttrraasstt ((C
Coom
mm
maanndd:: kk gg))
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
0
09
9.. BBrriigghhttnneessss ((C
Coom
mm
maanndd:: kk hh))
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min: 0
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
