background image

34

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.

You can control your TV using the buttons below.

By pressing

You can

POWER

Turn the TV on or off.

INPUT

Switch the TV’s input source 
between the TV and other input
sources.

CH +/–

Scans up or down through 
memorized channels.

VOL +/–

Adjust the volume of the TV.

MUTE

Turns on or off TV sound.

ote

Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.

Controlling other TVs with the remote

You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.

1. While holding down TV POWER button, press

the number buttons to select the manufacturer
code for your TV (see the table below).

2. Release TV POWER button.

Code numbers of controllable TVs

If more than one code number is listed, try entering
them one at a time until you find the one that works with
your TV.

Manufacturer

Code Number

LG / GoldStar

1 (Default), 2

Zenith

1, 3, 4

Samsung

6, 7

Sony

8, 9

Hitachi

4

otes

Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.

TV Control
Buttons

Summary of Contents for XBV442









































Reviews: