background image

9

ENGLISH

NOTES: • When there is an obstacle between the TV/VCR

and the remote control, the remote control may
not operate.

• When direct sunlight, an incandescent lamp,

fluorescent lamp or any other strong light
shines on the Remote sensor of the TV/VCR,
the remote operation may be unstable.

The precautions below should be followed when using
batteries in this device:

1

Use only the size and type of batteries specified.

2

Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.

3

Do not mix different types of batteries together (e.g. Al-
kaline and Carbon-zinc) or old batteries with fresh ones.

4

If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.

5

Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture (Follow
battery manufacturer’s directions).

EFFECTIVE DISTANCE OF THE

REMOTE CONTROL

Slide the battery compartment cover.

Install two “AA” batteries (not supplied), paying attention
to the polarity diagram in the battery compartment.

Replace the compartment cover.

Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard 120V 60Hz
polarized AC outlet.

NOTES: • Never connect the AC line cord plug to

anything other than the specified voltage (120V
60Hz). Use the attached power cord only.

• If the polarized AC cord does not fit into a

nonpolarized AC outlet, do not attempt to file
or cut the blade. It is the user's responsibility
to have an electrician replace the obsolete
outlet.

• If you cause a static discharge when touching

the unit, and the unit fails to function, simply
unplug the unit from the wall outlet, wait 10
minutes and plug it back in. The unit should
return to normal operation.

Wider Hole
 and Blade

Polarized AC Cord Plug
(One blade is wider than the other.)

AC Outlet

BATTERY INSTALLATION

BATTERY PRECAUTIONS

POWER SOURCE

15 FEET (5m)

30˚

30˚

  5D70201A E P02-09

6/24/02, 4:25 PM

9

Summary of Contents for TVBR2742Z






























Reviews: