ELECTRICAL ADJUSTMENTS
2-13: SUB TINT (For 13/1942Z Only)
1.
2.
3.
4.
5.
6.
Receive the color bar pattern. (RF Input)
Connect the synchro scope to TP803.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (16) on the remote control to
select "TINT".
Press the VOL. UP/DOWN button on the remote control
until the waveform becomes as shown in Fig. 2-2.
Receive the color bar pattern. (Audio Video Input)
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 2~4.
Fig. 2-2
2-14: SUB COLOR (TVBR13/1942Z Only)
1.
2.
3.
4.
5.
6.
Receive the color bar pattern. (RF Input)
Connect the synchro scope to TP801.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (15) on the remote control to
select "COLOR".
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 110% of the white
level. (Refer to Fig. 2-3)
Receive the color bar pattern. (Audio Video Input)
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 2~4.
White 0%
Red Level
White 100%
0%
Fig. 2-3
2-15: OSD HORIZONTAL
1.
2.
Activate the adjustment mode display of Fig. 1-1.
Press the VOL. UP/DOWN button on the remote
control until the difference of A and B becomes
minimum. (Refer to Fig. 2-4)
B
A
TV
00 OSD 15
Fig. 2-4
110%
2-12: SUB CONTRAST (For TVBR2542Z Only)
1.
2.
3.
4.
5.
6.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (14) on the remote control to
select "CONTRAST".
Press the VOL. UP/DOWN button on the remote control
until the white color level is adjusted to 300
±
10NIT.
Press the INPUT SELECT button on the remote control
to set to the AV mode.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (14) on the remote control.
Press the VOL. UP/DOWN button on the remote control
until the white color level is adjusted to 200
±
10NIT.
Receive the color bar pattern. (Audio Video Input)
Press the AV button on the remote control to set to the
AV mode. Then perform the above adjustments 2~5.
2-13: SUB TINT/SUB COLOR (For TVBR2542Z Only)
1.
2.
3.
4.
5.
6.
7.
8.
Receive the color bar pattern. (RF Input)
Connect the synchro scope to CP602.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (16) on the remote control to
select "TINT".
Press the VOL. UP/DOWN button on the remote control
until the waveform becomes as shown in Fig. 2-2.
Press the CH DOWN button (15) on the remote control
to select "COLOR".
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 110% of the white
level. (Refer to Fig. 2-3)
Receive the color bar pattern. (Audio Video Input)
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 2~6.
CM152
2-27
SERVICING
