Zenith Therm-X AT, User Manual

Page: 12 / 38

11
IFU-001 Rev. 8
8 O
PERATING
I
NSTRUCTIONS
F
OR
H
EALTHCARE
P
ROVIDERS
Before use, please read Section 17, “Contraindications”, and
Section 18 , “Precautions and Warnings”
If you are a certified healthcare provider, you may program the device for therapy using the following
instructions:
Connect the power supply to the Therm-X main unit and an AC outlet. When the unit initiates it will
beep briefly and the Therm-X logo will briefly appear followed by the Home Screen.
Programming a Therapy
Certified users will be able to program a variety of therapies for Therm-X using cryotherapy,
thermotherapy, and DVT prophylaxis options.
From the Home Screen, select “ Program
Treatment ” . If the password is enabled, you must
enter it before proceeding. Use the password you
received with your machine. For more information
on passwords, please see System Tools on page
16 .
The ‘ Select Treatment Cycle ’ screen will then
appear. This screen will have a variety of Quick Picks
available for selection based on commonly
prescribed treatments. There will also be a
“Custom” button, a “DVT Only” button, and a
“Back” button that will return you to the home
screen.
Upon selecting a Quick Pick, the temperature, compression level, and time of the cycle will be
preloaded. On this screen, you will be able to select buttons for “Add 2nd Cycle” (if available), “Add
DVT” (if available), “Confirm”, or “Back” to ret
urn to the ‘ Select Treatment Cycle ’ screen. The
“Confirm” button will enter the chosen cycle into the system’s memory. See m ore about Quick Picks
on page 14 .