Zenith R56W28, Operating Manual

Page: 10 / 56

P A G E 1 0
206-3594
Hook Up VCR
Connect your off-air antenna and VCR to your Entertainment Machine
VARIABLE
AUDIO OUT
R
L
ANTENNA/
CABLE 1
ANTENNA/
CABLE 2
TO CABLE
BOX
INPUT 1 INPUT 2
S-VIDEO
S-VIDEO
MONO/L
R
MONO/L
R
VIDEO VIDEO
AUDIO
AUDIO
INPUT 3
INPUT 4
Y/VIDEO
P
B
P
R
R
MONO/L
AUDIO
Y/VIDEO
P
B
P
R
R
MONO/L
AUDIO
In
Out
Audio Video
3 4
VCR
Back AV panel
A/V cables
not included
with TV
Cable TV
wall jack
Round wire
(75 ohm)
RF coaxial wire
(75 ohm)
Antenna
S-Video
OR
Or
Or
1
2
3
4
Locate the RF or VHF/UHF/CATV In jack on the back of your VCR. Connect the cable line coming
from your wall directly to this jack.
Locate the Antenna/Cable 1 jack on the back of your Entertainment Machine. Connect the cable
coming from the RF or VHF/UHF/CATV Out jack on the back of your VCR directly to this jack.
Find the composite video and audio jacks on the back of your VCR, and connect them follow-
ing the instructions provided with your equipment.
You may connect either the composite video or the S-video cables to Inputs 1 or 2. (Do not
connect BOTH the composite and the S- Video cables to an input set of jacks. In the event
that you connect both composite and S-Video cables, only the S-video will work.)
Turn to page 15 to continue setting up your Entertainment Machine.
If you want to receive your signals on Channel 3 or 4, locate the Out
to TV jack on your VCR. Connect a cable from the Out to TV jack to the
Antenna/Cable 1 jack on the back of your Entertainment Machine.
For several pieces of equipment, edit the names under Source ID so
you don’t forget which is which. See page 31.
Note: Connect to either Input 1 or 2.