background image

P A G E   5 4

206-3492-O

Troubleshooting

Some quick and easy tips to resolving problems

Symptoms

Cause(s)

Possible Solution(s)

Page(s)

Power

No Power.

• AC Power Cord not connected

-Connect power cord. Try a different outlet.

15 - 19

or outlet doesn’t work,

-Local power failure?

No Source image.

• Source turned off.

-Turn Source equipment on.

Remote Control

Remote doesn’t work.

• Remote not in TV mode.

-Press TV to put remote into TV mode.

23

• TV software functioning.

-Wait until software function is complete.

• Not aimed at remote sensor.

-Point remote at TV Front Control Panel.

22

• Remote too far from TV or

-Move remote closer to TV or darken room.

IR path to TV obstructed.

-Remove obstructions.

• Weak batteries.

-Replace batteries.

15 - 19

• Wrong battery polarity.

-Check that “+” and “-” match in battery compartment.

15 - 19

• Too much light in room

-Dim room light.

Menu Operation

Menu options can’t be 

• Software lock-up.

-Unplug power cord for 5 minutes to unlock software.

changed or selected.

(Reset clock if necessary.)

15 - 19

Caption/Text Problems

Picture has a big black box 

• Caption/Text mode turned on.

-The CC (closed caption) option may be in Text 1, 2, 3, or 4 mode. 

on it, but the sound is O.K.

-Select Caption 1, or OFF in the Caption/Text menu.

No Closed Captions or Text.

• Not available on program.

-Check local TV listings to see if available on broadcast.

31

-Relocate over-the-air antenna.
-Try a different channel with Closed Captions or Text.

• Not turned on.

-Pick a Closed Caption or Text option and turn Captions on.

31

Captions appear when

• EZ Mute selected.

-Set Captions option to off.

31

sound is muted.

Parental Control Problems

Protected/blocked message

• Program content is restricted.

-Key-in password and turn Lock On/Off (restrictions) Off.

36/37

shows on-screen.

-Set to Off in Lock On/Off menu. 

• Don’t know password.

-Tune to channel without Parental Control “Content” restrictions.
-Wait until restriction time expires.

TV-PG programs blocked.

• TV-PG set to be blocked.

-Reset restrictions to PG-13 so TV-PG programs will appear.

35/36

Foul language is heard.

• Foul language not blocked.

-Restrict Language in Content options on Parental Control menu.

• Program is not rated.

-Restrict programs with no ratings.

Note: Also provided with this TV and intended for qualified Servicer/Technicians usage only:

Installation and Setup Guide

- A limited access publication with information and instructions primarily

used by qualified electronics servicer/technicians to configure or adjust the operational features of this TV.

Summary of Contents for Presentation H25E46DT





























































Reviews: