Zenith P50W28A Series, Service Manual

Page: 16 / 36

IR CODE(NEC Format)
G
Connect your wired remote control to the Remote port on the Monitor.
Set the CONTROL LOCK to ‘ON’ on the Monitor back panel to operate Monitor with wired remote control.
G
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
G
Configuration of frame
G
Repeat code
G
Lead code
•
1st frame
Low
custom code Lead
code High
custom code
Data code Data code
T
C
T
f
T1
C0
Carrier frequency
F
CAR
= 1/T
C
= f
OSC
/12
Duty ratio = T1/T
C
= 1/3
•
Repeat frame
C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat code
9 ms 4.5 ms
0.55 ms
9 ms
2.25 ms
G
Bit description
G
Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
•
Bit “0”
Tf Tf
Tf=108ms @455KHz
0.56 ms 0.56 ms
1.12 ms
•
Bit “1”
2.24 ms
How to Connect
How to Connect
Remote Control IR Code (NEC Format)
Remote Control IR Code (NEC Format)
http://www.wjel.net
All manuals and user guides at all-guides.com
all-guides.com