BEFORE OPERA
TION
9
Setting the Voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.
Setting the CLOCK
11
Press CLOCK.
(If the clock requires setting, press and hold
CLOCK
for more than 2 seconds.)
- The hours begin to flash.
2
2
Select a 24 hour cycle or 12 hour cycle by
pressing PRESET (-)/(+).
3
3
Press SET to confirm the selected hour cycle.
4
4
Use PRESET (-)/(+) to set the correct hours.
5
5
Press SET.
6
6
Use PRESET (-)/(+) to set the correct minutes.
77
Press SET and the correct time is shown on
the display.
8
8
Press CLOCK at any time to display the time
for about 3 seconds.
Volume Adjustment
• Turn
VOLUME CONTROL KNOB
clockwise to
increase the sound level, or counterclockwise to
decrease it.
• Press
VOLUME CONTROL (
)
to increase the sound
level, or press the
VOLUME CONTROL (
)
to
decrease it on the remote control.
Sound Quality Adjustment
• To activate stereo sound
You can choose between 4 fixed sound impressions.
Select a desired sound mode by using
EQ PATT.
button on the remote control or
EQ
button on the
front panel.
FLAT
: linear frequency response
ROCK
: more bass, more treble
POP
: less bass, less treble
CLASSIC : for orchestral music
• Headphone Socket
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
Sleep Function
When the sleep timer is used, the power is automatically
turned off after the specified time has elapsed.
11
To specify the time delay before the power is
turned off, press SLEEP.
In the display window you can see
for about 5 seconds. This means that the system
turns off automatically after 90 minutes.
Each time the button is pressed the time interval
before it turns off is reduced by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
2
2
To check the remaining time until the power is
turned off.
While the sleep function is active press
SLEEP
briefly. The time remaining until it turns off is
displayed for about 5 seconds.
ote
If you press
SLEEP
while the sleep time is displayed,
the SLEEP time is reset.
To cancel the sleep timer mode
If you wish to stop the function, press the
SLEEP
button
repeatedly until SLEEP 10 appears, and then press
SLEEP
once again while SLEEP 10 is displayed.
MUTE
Press
MUTE
to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator flashes in the display
window.
SURROUND
To activate surround mode
Press
SURROUND
to reinforce surround effect.
SURROUND OFF
↔
SURROUND ON
XDSS (Extreme Dynamic Sound System)
Press
XDSS
to reinforce treble and bass.
The “XDSS ON” or “XDSS OFF” indicator lights up.
To cancel it press
XDSS
again.
Audio Adjustment
(12HR)
(24HR)
or
Summary of Contents for LX-230A
Page 16: ...P NO 3828R A075Z...
