Zenith L17W36DVD, Operating Manual

Page: 14 / 44

14
Installation
Resolution
640x480
800x600
Horizontal
Frequency(KHz)
31.4
35
37.5
43.2
35.1
37.8
48
46.8
53.6
60
67
75
85
56
60
72
75
85
49.7
48.3
56.4
60
68.6
39.5
47.6
75
60
70
75
85
50
60
Vertical
Frequency(Hz)
Resolution
832x624
1280x768
1024x768
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
Monitor Display Specifications
ANT IN
+
75
Ω
PC
SOUND
PC INPUT OPTICAL
DIGITAL
SOUND
OUT
- After setup, be sure to select RGB-PC source on TV.
PC Setup
PC Setup
Connections
1. Set the monitor output resolution on the PC before
connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND
input.
Viewing Setup
1. Turn on the PC.
2. Use the tv/video or multimedia button on the remote
control to select RGB-PC.
NOTES
a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats
(VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format,
please refer to the operating manual for the computer you are using).
b. If the message “ Out of range ” appears on the screen, adjust the PC output to a format listed in the ‘Monitor Display
Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
If you don’t use the PC cable provided, DPM mode may not work.
TV Back Panel
TV Back Panel
ANT IN
+
75
Ω
PC
SOUND
PC INPUT
DVD OUT
OPTICAL
DIGITAL
SOUND
OUT
VIDEO
VIDEO
DIGITAL AUDIO
OPTICAL
DVD Output Setup
DVD Output Setup
Second TV or Monitor
The TV has a special signal output capability which allows
you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV’ DVD OUTPUT
and OPTICAL DIGITAL SOUND OUT jack. See the
Operating Manual of the second TV or monitor for further
details regarding that device’s input settings.
Notes: • If your DVD has no optical digital audio input jack,
it’s impossible to use DVD sound output.
• Do not look into the optical output port. Looking at
the laser beam may damage your vision.
• If your external audio equipment has a digital audio
input optical port, you can connect it to your TV.