Auto Programming: Finding/Erasing Channels
25
BASIC
FEA
TURES
- For Auto program to work, the programming source must be connected to the TV and the TV must be
receiving programming signals either over-the-air or from a cable-type service provider.
2
Press the
a.prog
or volume (
F
,
G
)
buttons to begin the channel search.
- When the channel search is complete, use the channel (
D
,
E
) buttons to review the memorized
channels.
- If you press the
enter
(
A
) button during auto programming, the function will stop and only chan-
nels found and programmed up to that time will remain in memory.
- Auto programming function can memorize only the channels which are being received at that
time (some stations have limited broadcast hours).
Channel Search (Auto Programming)
Channel Search (Auto Programming)
1
Press the
a.prog
button on the remote
control.
●
Wait for auto program to complete the
channel search cycle before choosing a
channel. The TV scans for over-the-air
channels and then channels provided by a
cable service.
Auto program
F G
Auto program
TV 63
34%
Stop :
A
Channel number being
memorized is displayed.
