Zenith IQB64W10W, Operating Manual

Page: 56 / 72

P A G E 5 6
206-3533-O
More Mode Functions
Turn on the device you wish to operate.
On the remote control, press the device
button you wish to assign this device to,
and the Mute button simultaneously.
Note: “SET will appear in the LCD.
Press the device button that corresponds
to the actual device you plan to operate.
Note: “SET” will appear in the LCD.
Select the three digit code number from
the code list found on pp 57-61 for the
device you will be operating.
Point the remote toward the device, and
press in the three digit code number.
Note: “SET ###” will appear in the LCD.
The device will turn off when the correct
three digit code number has been select-
ed. Press the DEVICE button selected in
step 2. This will store the three digit
code into that DEVICE button. Note:
“PASS” will flash in the LCD.
1
1 2 3
4 5 6
7 8 9
0
record
pause chapter chapter
play
stop
rewind fast fwd
menu
enter
quit ratio
surf
flashbk
picture
power mute
guide
vcr +
info
video dvd
clear
vcr
cable
audio
aux
tv sat
vol
ch
pg up
pg dwn
antenna dbs
2
2
3
4
5
4/5
3
The feature can be used to program the remote control for more than one TV, VCR, Satellite Receiver, etc. The
three digit code for any device can be stored in any of the DEVICE buttons. For example: For two VCRs, the first
VCR can be stored in the VCR DEVICE button under normal set up procedures, and the second VCR can be pro-
grammed into the unused CATV or any other DEVICE button.
6