206-3482
P A G E 4 5
Mini glossary
AUX
Auxiliary equipment. Can be any equipment which does not have a dedicated key on your remote like Cable or VCR.
Typically a second VCR, stereo system, audio tape deck, etc.
1
2
3
4
5
6
Control up to seven different devices with your remote
prg
cable vcr
aux
tv
1
2
3
4
5
6
7
0
8
9
menu
pip
pip ch
freez
surf
mute
power
volume
volume
tv/vcr
source
flashbk
enter
timer
pause
record
play
stop
rewind
f. fwd
quit
channel
channel
V-chip+
4
2
5
6
Programming your Zenith remote may allow you to use one remote to
work up to 7 different products or devices.
Some devices may not work with your Zenith remote control.
3
Refer to the chart on page 47/48 to find the type and brand
name of the device you're programming.
Press and hold PRG until the indicator light turns on, then
release PRG.
Press AUX and the 1 on the NUMBER keypad at the same
time (for AUX +1).
Using the NUMBER keypad, enter the three-number code for
the device you've selected.
Press ENTER to save the code.
With the device turned on, point the remote at it and press
POWER. It should turn off.
Repeat the steps for AUX+2, and AUX+3.
7
Aux-1, Aux-2, Aux-3
Indicator Light
