P A G E 1 0
206-3854
S-Video Hook Up
Connect an external S-Video device to the TV
TV Back
S-Video
In
M.P.I.
R- Audio - L
In
Antenna
Cable
Video
In
Matrix
Out
R- Audio - L
In
S-Video cable
not included
with TV
S-Video Device
S-Video
Device
Connections
Panel
S-Video Out
Audio Out
R L
Locate the S-Video out jack on the back of the
VCR or other S-Video device.
Connect the S-Video cable from the device to the
TV S-Video In jack, according to the diagram to
the right. As required, make the other audio con-
nections as shown to the right.
Remove the back of the remote, put in
two AA batteries.
Plug in the TV. The TV is designed to operate on
standard current, 120-volt 60 Hertz AC. Do not
attempt to operate it on DC power.
Go to page 12 to Auto Program the TV.
Back of
Remote
120 V AC
60 Hz
1
2
3
4
5
No S-Video cable or audio cables are provided with the TV. Since
S-Video is for Video only, you must connect audio cables or there
will be no sound for the S-Video source.
