background image

Your Zenith TV Warranty

For Customer Support/Service

Please call: 

1-888-865-3026

www.zenith.com

Direct-View Color TV

Welcome to the Zenith family! We believe that you will be pleased with your new Zenith TV. Please read this warranty carefully, it is a “LIMITED WAR-
RANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state
within the U.S.A. 

ZENITH’S RESPONSIBILITY

Service Labor

During a period of one year from effective warranty date, Zenith will provide service labor by a Zenith authorized service center when needed, as

determined by the Zenith service center, as a result of manufacturing defects.

Parts

New or remanufactured replacements for factory-defective parts will be supplied by a Zenith authorized service center for one year from effective 
warranty date (color picture tube — two years). Such replacement parts are warranted for the remaining portion of the original warranty period.

Warranty Service

Warranty service is provided in the institution in most cases. (Some repairs may require the unit to be taken by the servicer to the repair facility and
returned, at no additional charge.) Call 

1-888-865-3026

for further information.

Not Covered

This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems,
cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes
beyond the control of Zenith. Any alteration of the product after manufacture voids this warranty in its entirety.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ZENITH SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR 
INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNECTION WITH THIS PRODUCT. SOME STATES DO NOT 
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

OWNER’S RESPONSIBILITY

Effective Warranty Date

Warranty begins on the date of installation of the Commercial Products Direct-View Television Receiver. 

For your convenience, keep the dealer’s dated bill of sale or delivery ticket as evidence of the purchase date.

Operating Guide

Read your Operating Guide carefully so that you will understand the operation of the TV and how to adjust the controls.

Antenna

Reception problems caused by inadequate antenna or faulty antenna connections are the owner’s responsibility.

Warranty Service

For warranty service information, call 1-888-865-3026.

Parts and service labor that are Zenith’s responsibility (see above) will be provided without

charge. Other service is at the owner’s expense. If you have any problem in obtaining satisfactory warranty service, call 

1-888-865-3026.

You must provide the model number, serial number and date of purchase or date of original installation. 
Before you ask for warranty service, read “Maintenance and Troubleshooting” in the operating guide. You might avoid a service call.

© Copyright 200

5

 Zenith Electronics Corporation

D-Presntn Warr 11/00

3828VA0A30

P

 

Summary of Contents for H24F36DT Series

















































Reviews: