Zenith F-DV25, Installation And Operating Manual

Page: 18 / 52

PAGE 18 RADIO OPERATION
Presetting the radio stations
Press the TUNER/BAND on the front
panel repeatedly or TUNER on the
Remote control until the FM or AM appears
in the display window.
And then every time you press the
TUNER/BAND (TUNER : on the remote
control), FM and AM changes alternately.
Press and hold the TUNING (+/-) on the
front panel for about two seconds until the
frequency indication starts to change,
then release.
Scanning stops when the unit tunes in a
station.
Press the PROG./MEMO.
A preset number will flash in the display window.
Press the PRESET (-/+) on the front panel
to select the preset number you want.
Press the PROG./MEMO. again.
The station is stored.
Repeat steps 3 to 6 to store other
stations.
To tune in a station with a weak signal
Press the PRESET (-/+ ) repeatedly in step 3 to tune in
the station manually.
To clear all the memorized stations
Press and hold the PROG./MEMO. for about two
seconds, “RESET” appears in the display window and
then press PROG./MEMO. again, the stations are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
follow the steps 5-6 as above.
To recall presets
Press and hold the PRESET (-/+) or PRESET
D
/
E
(on
the remote control) until the desired preset number
appears or press it repeatedly.
1
2
3
4
5
6
7
You can preset 30 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume to the minimum.
POWER MUTE
TUNER DVD/CD TAPE AUX
MDSS SLEEP
TITLE SUBTITLE
SLOW
MARKER
ANGLE ZOOM
REV
FWD
SEARCH
VOLUME
A-B CLEAR
SELECT STEP STOP
PREV. NEXT PROGRAM
REPEAT
SELECT/ENTER
EQ SOUND AUDIO
DISPLAY RETURN
SET UP MENU
RANDOM
PRESET
1 2 3 4 5
6 7 8 9 0
TAPE
DVD
CD
PRESET
PROG./MEMO.
TUNING
(+/-)
TUNER/BAND
STOP/
RESET
TUNER
PRESET
(-/+)