20
Operation with Radio (Cont’d)
Sleep Timer Setting
You can set the DVD receiver to turn off automatically at
a specified time.
11
Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears in the dis-
play window.
2
2
Each time you press SLEEP the setting changes
in the following order.
SLEEP 120
→
90
→
60
→
50
→
40
→
30
→
20
→
10
→
OFF
otes
You can check the time remaining before the DVD
receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
Dimmer
This function will appear in the display window and vol-
ume LED in power-on status.
Press the DIMMER repeatedly.
Mute
Press MUTE to turn off the sound, press again to
restore.
For example, you can mute your unit to answer the tele-
phone, “MUTE” indicator flashes in the display window.
Using Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
PHONES connector
.
The speakers are automatically disconnected when you
plug in headphones (not supplied).
Selecting Input Source
You can use VCRs or other units connected to the
VIDEO1, VIDEO2 connectors or Optical connector.
Refer to the owner’s manual supplied with the unit for
further information on the operation.
Press VIDEO1 or VIDEO2 repeatedly on the remote
control to select the desired input source.
Each time you press this button, the mode of the func-
tion changes in the following sequence:
VIDEO1 ANA:
for selecting the analog signal from VIDEO1
AUDIO IN (L/R) & VIDEO IN Connectors.
VIDEO1 DIG:
for selecting the digital signal from OPTICAL
IN Connector.
VIDEO2 ANA:
for selecting the analog signal from VIDEO2
AUDIO IN (L/R) & VIDEO IN Connectors.
VIDEO2 DIG:
for selecting the digital signal from OPTICAL
IN Connector.
ote
The Optical input function is available only when the
other unit’s Sampling Frequency is 32 ~ 48kHz.
