Zenith DVB352, Service Manual

Page: 56 / 71

4-4
DECK MECHANISM DISASSEMBLY
(S10)
Fig.(B)
(S15)
(S15)
(S14)
(S13)
GEAR SLIDER
GEAR MAIN
GEAR EXCHANGE
GEAR LOADING
GEAR WHEEL MAIN
MOTOR ASSEMBLY MAIN
BASE MAIN
GEAR UP/DOWN
Fig.(C)
(L4)
MOTOR ASSEMBLY MAIN
PCB ASSEMBLY MAIN MODE
Fig.(A)
(S9)
(S9)
MODE SWITCH
(C8)
(S12)
(S11)
Fig. 4-4
4. Base Assembly Main(Fig. 4-4)
Put the Base Assembly Main face down(Bottom Side).
4-1. PCB Assembly Main Mode
1)Unconnect the Connectors (C8), (C9).
2)Release three Screws(S9).
When reassembling, align the Mode Switch position as
Fig.(A).
Put the Base Assembly Main on original position(Top Side)
4-2. Gear Slider
1) Release Screw(S10).
4-3. Gear Exchange
1) Release Screw(S11).
4-4. Gear Main
1) Release Screw(S12).
4-5. Gear Up/Down
1) Release Screw(S13).
4-6. Gear Wheel Main
1) Release Screw(S14).
4-7. Gear Loading
4-8. Motor Assembly Main
1) Release 2 Screws(S15).
2) Unlock the Locking Tab(L4).
4-9. Base Main
Note
Note
Note