background image

Your Zenith Limited Warranty

DVD RECEIVER

Welcome into the Zenith family! We believe that you will be pleased with your new Zenith Entertainment Machine. Please
read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific
legal rights, and you may also have other rights that vary from state to state within the U.S.A. 

ZENITH’S RESPONSIBILITY

Service Labor

During a period of 90 days from effective warranty date, Zenith will provide service labor by a Zenith authorized service

center when needed as determined by Zenith, as a result of manufacturing defects.

Parts

New or remanufactured replacements for factory-defective parts will be supplied by a Zenith authorized service center for
one year from effective warranty date. Such replacement parts are warranted for the remaining portion of the original 
warranty period.

Not Covered

This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls in the home,
installation or repair of home antenna systems, cable converters or cable company-supplied equipment; it also does not
cover damage due to misuse, abuse, negligence, acts of God or other causes beyond the control of Zenith. Any alteration of
the product after manufacture voids this warranty in its entirety.

OWNER’S RESPONSIBILITY

Effective Warranty Date

Warranty begins on the date of original consumer purchase. For your convenience, keep the dealer’s dated bill of sale or a

delivery ticket as evidence of the purchase date.

Operating Guide

Read your Operating Guide carefully so that you will understand the operation of your DVD Receiver and how to adjust the
customer controls.

Carry-In Service

The video product must be taken to a U.S. or Canadian Zenith authorized service center for warranty service and must be
picked up by the owner.

TV Set Performance

It is the owner’s responsibility to maintain the TV receiver with which the video product is used, and the associated 
antenna system, in proper operating condition.

Important 

Product Registration—Please fill out and mail your Product Registration Card. It is imperative that Zenith know how to
reach you promptly if we should discover a safety problem that could affect you.

Warranty Service

For warranty service information, contact any Zenith authorized service center. Parts and service labor that are Zenith’s
responsibility (see above) will be provided without charge. Other service is at the owner’s expense. If you have any problem
in obtaining satisfactory warranty service, call or write the Zenith Response Center. You must provide the model number,
serial number and date of purchase or date of original installation. Before you ask for warranty service, read “Before calling
service personnel” in your operating guide. You might avoid a service call.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ZENITH SHALL NOT BE LIABLE FOR
ANY CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN
CONNECTION WITH THE PRODUCT.

ZENITH ELECTRONICS CORPORATION 

Zenith Part No. 206-3728

2000 MILLBROOK DRIVE

GS# 3835RS0024B

LINCOLNSHIRE, IL 60069

Printed in China

Issue O

Customer Service

Zenith National Response Center

201 James Record Road, Building #3

Huntsville, AL 35824

Phone: (256) 772-1515

Fax: (256) 774-4070

email: [email protected]

Summary of Contents for DA3520

















































Reviews: