Zenith Concierge H25F36DT Installation And Operating Manual, Warranty Download Page 42

P A G E   4 2

206-3489-O

Routine TV cabinet and screen cleaning

Maintenance

1. Here’s a great way to keep the dust off the screen for a while. Wet a soft cloth in a mixture of luke-

warm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost
dry, and then use it to wipe the screen. 

2. Make sure the excess water is off the screen, and then let it air-dry before turning the TV on. 

1. Use a soft cloth with a mild soap solution to wipe the cabinet. (Avoid using any harsh, industrial

strength variety of cleaner.) 

2. Rinse the cloth and wipe the cabinet again.

3. Let the cabinet air-dry before turning the TV on.

Use a quality wood cleaner and polish. This will protect the TV from dirt and dust, as well as keep the
cabinet looking new.

If the TV is to be left dormant for a long time, it’s a good idea to unplug the power to pro-
tect against possible damage from lightning or power surges. If you use an off-air antenna,
you may also want to disconnect it from the back of the TV. 

Screen Cleaning

Minimal Usage

If you unplug the TV, you may have to reset the clock using the Clock Set menu described earlier. See
page 19.

Cabinet Cleaning

Wood Cabinet

Careful and regular cleaning can extend the the useful service life of the TV. Be sure to turn the power off
and pull out the plug before you begin any cleaning.

Summary of Contents for Concierge H25F36DT

















































Reviews: