P A G E 1 6
206-3599-O
Fine-tuning the guest’s channel selection list
Channel Add/Delete/Blank
Press the MENU key on an Installer’s remote so the SETUP
MENU appears.
Press SELECT repeatedly to go to the Add/Del/Blnk
option.
Using either the NUMBER keypad and ENTER or the
Channel Up/Down arrows on the remote, select a chan-
nel. (If adding a deleted channel, you will need to use
the number keypad and ENTER.)
Using the Right/Left ADJ arrows, pick whether that
channel is Added, Deleted, or Blank.
To continue, select another channel and repeat from
Step 3. When you are finished, press ENTER to remove
menu.
Adding Aux, VCR 3, or VCR 4 to the Channel
Preview List
Go to the Setup menu, select the Add/Del/Blnk option.
Use Channel Up/Down to select the option and choose
Added.
Note: If the option was turned off in the Service menu,
you will have to reinstate it before it can appear as an
option in the Channel Preview list.
Notes:
Adding VCR 3 and/or VCR 4 as available channels
forces TV Channel 3 and/or 4 to be retained, when run-
ning Auto Program (Channel Search), even though the
equipment connected to the Antenna/Cable (RF) jack
(like a cable converter and/or VCR) may be turned off.
You can elect to Add, Delete or Blank:
VCR 3
,
VCR 4
,
and
Aux
.
1
2
3
4
5
TIMER
CH PREVIEW
ENTER
1
2
3
4
5
6
7
8
9
0
POWER
FLSHBK
MUTE
VOL
UME
CHANNEL
TV/FM
CC
MENU
ALARM
ADJ
ADJ
SELECT
2
CH 44 ADDED
Mini glossary
ADD
Adds new channels to the list that the guest can scroll through when using the remote.
DELETE
Removes channels for one reason or another from the list that the guest can scroll through.
BLANK
Removes the video signal from a channel so the guest will only receive the audio signal
.
4
3/5
1
If you delete a channel, it isn’t gone for good. Just select it
using the NUMBER keypad on the remote, or add it later.
3
3
