Zenith B50M88W, Operating Manual & Warranty

Page: 10 / 52

P A G E 1 0
206-3507-O
VIDEO 2
S-VIDEO 2
INPUT 1
L/MONO
VIDEO 1
S-VIDEO 1
AUDIO
MONITOR OUT
VIDEO
RIGHT
LEFT
SURROUND / EXTERNAL SPEAKERS
8 ohm ONLY
ANTENNA
CABLE
INPUT
VARIABLE
AUDIO OUT
LEFT
RIGHT
AUDIO AUDIO
RIGHT RIGHT RIGHT
LEFT
L/MONO
COMPONENT IN
( Y ) ( Cb ) ( Cr )
INPUT 2
SURROUND
EXTERNAL
STOP
CONNECT ONLY 8 ohm SPEAKERS
DO NOT SHORT CIRCUIT
THESE TERMINALS
(Such damage is NOT COVERED
by your television warranty.)
In
Out
Audio Video
3 4
VCR
Back AV panel
A/V cables
not included
with TV
Cable TV
wall jack
Round wire
(75 ohm)
RF coaxial wire
(75 ohm)
Antenna
S-Video
OR
1
2
VCR
Locate the RF or VHF/UHF/CATV In jack on
the back of your VCR. Connect the cable
line coming from your wall directly to
this jack.
Find the composite video and audio
jacks on the back of your VCR, and con-
nect them following the instructions
provided with your equipment.
You may connect either the composite
video or the S-video cables to your
Entertainment Machine. (Do not con-
nect BOTH the composite and the S-
Video cables. In the event that you
connect both composite and the S-
Video cables, only the S-video will
work.)
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your
Entertainment Machine.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna/Cable jack on the back of your
Entertainment Machine.
You will need to connect a VCR to your
Entertainment Machine if you wish to use your
Picture-In-Picture (PIP) feature. (See page 38)