Zenith 7179242900, User Manual

Page: 2 / 36

1 General safety instructions
• Do not force open the locked
loading door. The door will
open immediately after the
washing cycle has ended. If the
door does not open, apply the
solutions provided for “Loading
door cannot be opened.” error in
the Troubleshooting section. In
case of forcing the loading door
to open, the door and the lock
mechanism may get damaged.
• Use detergents, softeners
and supplements suitable for
automatic washing machines only.
• Follow the instructions on the
label of textile products and the
detergent package.
• The water supply pressure
required to run the product is
between 1 to 10 bars (0.1–1 MPa)
• Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.
1.2 Hot surface safety
A
CAUTION!
• The glass of the loading door
gets too hot while washing at
higher temperatures. Therefore,
especially do not allow children
touch the loading door glass
while washing.
This section includes security
instructions which may help prevent
the injuries and material damage risks.
All kinds of warranties shall be invalid if
these instructions are not observed.
1.1 Life and property safety
A
CAUTION!
• Never place the product on a
carpet-covered floor. Otherwise,
lack of airflow beneath the
machine will cause electrical
parts to overheat. This will cause
problems with your product.
• Unplug the product if it is not in
use.
• Always have the installation and
repairing procedures carried out
by the Authorised Service Agent.
The manufacturer shall not be
held liable for damages that may
arise from procedures carried
out by unauthorised persons.
• The water supply and
draining hoses must be
securely fastened and remain
undamaged. Otherwise, there is
the risk of water leakage.
• While there is still water inside
the product, never open the
loading door or remove the filter.
Otherwise, risk of flooding and
injury from hot water will occur.