[22] slots ensuring that the second hole engages with a
tooth on the spool. Ease film forward by swat strokes of
Transport Lever [2] until it stops. The lower Sprocket Teeth
[26] should be properly engaged.
Fire shutter. Advance film by short strokes of transport
lever until both top and bottom sprockets are engaged. If
necessary tighten film on Take-up Spool [22] by turning
the flange at the base of the spool anti-clockwise with the
finger and in the cassette by gently turning the Rewind
Knob [16] in the direction of the arrow on the lever until
resistance is felt. This is especially necessary with twelve
exposure films.
Close the back of the camera until it clicks shut. Complete
wind-on if necessary until Transport Lever [2] stops.
Fire shutter. Advance film Transport Lever [2] using short
strokes until it stops. The Rewind Knob [16] should revolve
while this is being done.
Fire shutter and advance film again. Set Frame Counter [4]
to zero.
Set Film Speed Selector Dial [15] against Indicator [17]
appropriate to the speed of the film to be used. There are
two scales for films rated in ASA and DIN. Only click-
stopped numbered or intermediate positions may be used.
Intermediate positions are proportional. If using 1000 ASA
film set the selector to 500 ASA but use the next faster
shutter speed than indicated by the meter or close the
aperture ring by one full stop.
Summary of Contents for 12 XP
Page 1: ...Zenith 12 XP...
