4
Connecting the Phone
1.
Connect the handset and main phone case with the phone cord.
2.
Connect the LAN Port of the phone to the RJ45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
3.
Connect the 12V DC output plug to the Power jack on the phone and plug the
power adapter into an electrical outlet. If PoE switch is used in step 2, this step
could be skipped.
4. The LCD will display booting up or firmware upgrading information. Before
continuing, please wait for the main screen display to appear.
5. Using the web configuration interface or the menu of the touch screen, you can
further configure network connection using static IP, DHCP, etc.
The ITSV-3 has a built-in phone stand. To
use it, pull out the phone stand handle on
the back of the phone. Adjust the angle as
preferred and make sure the phone stands
still on the desktop.
Using the Phone Stand
3.5mm
Headset Port
LAN Port
Handset
Port
Power
RJ9 Headset
Port
HDMI Port
PC Port
SD Card Slot
*USB Port
*USB enabled only when power supply or PoE+ is used.
Slots for
wall mount
Built-in phone
stand for desktop